河北宏旭 沟渠分水槽模具 水泥分水槽模具 河流**护坡模具

河北宏旭  沟渠分水槽模具  水泥分水槽模具  河流**护坡模具

The basic knowledge of the mold making of cement water distribution tank includes many aspects, such as how to make the mold material, the mold size, the use area, the use of content and so on. Many aspects jbp����of knowledge constitute the whole system about the prefabricated block of the water tank, so it is necessary to understand the relevant content. From the shape of the water tank, it is concentrated in U-shaped, trapezoidal, rectangular, etc. according to the production mode, it can be divided into two modes: prefabrication and cast-in-place. Each production mode has different prefabricated block styles for the water tank. Generally, the cast-in-place operation is a simple rectangular structure. From the use point of view, the production of flume is mainly manual prefabrication, especially the water channel sub channel mold, the cement sub channel mold is very large. The basic knowledge of cement water distribution tank mold production in the production, we produce according to the design drawings provided by customers, so that we can customize the size of the mold, which is more suitable for our engineering application. We set the mold to the style that can be disassembled and assembled. The joint is tight and there will be no leakage. In this way, the detachable style will be more flexible and convenient when working, which can ensure that the actual operation of demoulding the precast concrete tank block is relatively simple, and the production efficiency will be relatively high. Usually, after using the mold for production, it is necessary to maintain the steel plate of the water channel distribution tank mold and the cement water distribution tank mold, so as to ensure that the mold product has a longer service life. The cost and usability of cement water distribution channel mold are lower, and it is expected to have better development in the market.